Generator Controller Auto Start Unit DSE702

$129.00

  • Model Number: DSE702AS
  • Warranty: 1 year
  • Product description: The model 702 is an Engine control module designed to control the engine via a key switch and push buttons on the front panel.The module is used to start and stop the engine and indicate fault conditions. This module will run through a pe-set start sequence including glow plug operation and start an engine (or display fault code) upon contact closure. Either pressing the start button on the panel or using a remote set of contacts will start or stop the engine.
Compare
SKU: UPCA-DSE702AS Category:

Description

1)The model 701/702 is an Engine Control Module designed to control the engine via a key switch and push buttons on the front panel.The module is used to start and stop the engine and indicate fault conditions,automatically shutting down the engine and indicating the cause of failure by LED,giving true,first up fault annunciation.

Additionally,the Auto start versions of the controller will respond to a remote switched input to begin the start sequence.

2) Model 702 has integral tamperproof LCD hours run counter to indicate total engine run time.

The Technical Data Of DSE702AS:

 Model DSE702AS  (Auto)
 Power Supply 8 to 35 Vdc Continuous
 Cranking Dropouts: Able to survive voltage dips during cranking. Without

The need for internal batteries.

 Alternator Input Range 15 – 305 V AC RMS (+20%)
 Alternator Input Frequency: 50 – 60 Hz at rated engine speed. (Minimum 75V AC)

Over speed: nominal frequency +14% (+24% Overshoot)

 Start Output: Solid State 1.2A negative grounding terminal
 Run Output: Solid State 1.2A negative grounding terminal
 Pre-heat Output: Solid State1.2A negative grounding terminal
 Operating Temperature Range: -30 to +70°C

Directly replaces Deep Sea Energy DSE702a-s

Additional information

Weight.39 kg
Dimensions6.5 × 11 × 8.4 cm

Reviews

There are no reviews yet.

Be the first to review “Generator Controller Auto Start Unit DSE702”
X